ТЪРСИ

AYRE KX-5

AYRE KX-5
УсилвателиПредусилватели
Ayre Acoustics

Каталожен №:

Може да се каже че е най-важният компонент в системата ви,a KX-5 предоставя цялата производителността и гъвкавостта, който  се очаква от един продукт на Ayre.

Features
-Ayre’s Diamond output stage
-Variable Gain Transimpedance (VGT) volume circuit
-Ayre’s exclusive Equilock circuit
-46 step volume control, each of 1.5 dB
-Linear analog power supply
-zero-feedback, fully-balanced discrete circuitry
-High-speed circuit board material
-Input ground switching for true source isolation
-Six inputs: four balanced, two single-ended
-Ayre Conditioner power line RFI filter
-AyreLink communication system

Specifications
Maximum Input Level
8 V rms – unbalanced inputs
16 V rms – balanced inputs

Gain
Gain Variable to match the required output level of the system without the need for attenuation.

Input Impedance
1 MΩ unbalanced inputs
2 MΩ balanced inputs (1 MΩ per phase)

XLR Input Polarity
Pin 1 = Ground
Pin 2 = Non-inverting (Positive)
Pin 3 = Inverting (Negative)

Frequency Response
DC - 250 kHz

Power Consumption
40 watts in operating mode
60 watts in operating mode (volume control active)

Dimensions
17.25" W x 13.25" D x 3.75" H
(44cm x 34cm x 10cm)

Weight
23 pounds (10.5 kg)

Специална оферта

Цена за брой
Препоръчителна цена 16 600 лв
Цена при нас 12 000 лв
Спестявате 4 600 лв
Описание Награди и ревюта

Може да се каже че е най-важният компонент в системата ви,a KX-5 предоставя цялата производителността и гъвкавостта, който  се очаква от един продукт на Ayre.

Features
-Ayre’s Diamond output stage
-Variable Gain Transimpedance (VGT) volume circuit
-Ayre’s exclusive Equilock circuit
-46 step volume control, each of 1.5 dB
-Linear analog power supply
-zero-feedback, fully-balanced discrete circuitry
-High-speed circuit board material
-Input ground switching for true source isolation
-Six inputs: four balanced, two single-ended
-Ayre Conditioner power line RFI filter
-AyreLink communication system

Specifications
Maximum Input Level
8 V rms – unbalanced inputs
16 V rms – balanced inputs

Gain
Gain Variable to match the required output level of the system without the need for attenuation.

Input Impedance
1 MΩ unbalanced inputs
2 MΩ balanced inputs (1 MΩ per phase)

XLR Input Polarity
Pin 1 = Ground
Pin 2 = Non-inverting (Positive)
Pin 3 = Inverting (Negative)

Frequency Response
DC - 250 kHz

Power Consumption
40 watts in operating mode
60 watts in operating mode (volume control active)

Dimensions
17.25" W x 13.25" D x 3.75" H
(44cm x 34cm x 10cm)

Weight
23 pounds (10.5 kg)


 Добави в селектирани