TAGA TTA-1000

TTA-1000 is a 60W Pure Class A high-end vacuum tube integrated amplifier utilizing KT88 tubes in the output stage (with the fixed grid load) and a 12AX7 tube preamp section, composed of 6SN7 long-tail phase inversion drive circuit.

TTA-1000 uses audiophile-grade coupling capacitors: Evox  for input tubes and Wima for connecting driver tubes with the output amp, and Rubycon capacitors in the amp section.  

The amplifier sounds in a very warm, lifelike way and high dynamics. The sound is very linear with almost no negative feedback.

Design: Vacuum tube amplifier
            Push-pull Class A
Vacuum tubes:4 x KT88, 2 x 6SN7, 1 x 12AX7
                     Triode operation mode
                     Manual bias regulation
Power output / impedance: 2 x 60W 4 ohm, 8ohm
Analog inputs: CD, Line:
                     • Sensitivity: 450mV
                     • Impedance: RCA 50K ohm

                    Phono input (MM/MC):
                     • Input impedance: 47Kohm | 47ohm
                     • Gain: 40dB | 60dB
                     • Output power: 400mV | 400mV, THD ≤1%
Analog outputs: RCA Pre-Out
Frequency response: 10Hz – 30kHz (±1dB)
Total Harmonic Distortions: ≤0.35% (1KHz/2V)
Signal/Noise ratio: ≥89db
Features / accessories: Manual bias adjustment

                                 Aluminum remote controller
                                 Tube cage (factory installed)
                                 Removable IEC power cord
                                White cotton gloves
AC power / power consumption: 230-240V 50Hz, 400W
Dimensions (H x W x D): 22.5 x 45 x 37.5 cm
Weight: 24 kg / pc.